Heat ExchangerEfficiently recovers the heat in used wash water and bring back the energy into the machine.
Environment friendly - Large quantities of energy is saved which leads to a less impact on the environment.
Economical - Recovers the heat in used wash water and bring back the energy into the machine.
When the accessory heat exchanger is mounted on the hood type dishwashing machine a highly efficient heat recovery is given from the used wash water which energy is brought back to the machine. This gives a less impact on the environment and at the same time a more economical dishwashing is obtained. The heat exchanger saves 34% energy or 0,11 kWh/basket and it lowers the total connected power as a 16A fuse can be used instead of a 20A on a cold water connected machine.
The drain water first passes through a double pipe system discretely mounted in the back of the dishwasher. The incoming cold water (10°C) is pre-heated using the drain waters energy and the heat exchanger generates a truly efficient heat exchange. If combined with a condensing unit 41% energy or 0,13 kWh/basket is saved.
Steam HoodIn order to achieve a good working environement in the dish room.
As an accessory to hood type dishwashing machines there is a steam hood which is attached on the top edge of the machine with existing screws.
For attachment to wall 2 brackets are enclosed.
With the machine's hood in open position the hot steam is evacuated via the back of the hood. The connection of the steam hood is designed so that the condensation water runs back into the machine's tank.
The steam hood is connected to the ventilation system with a hose or 160 mm diam. pipe.
Under the Bench Set WD-4
An optimal and effective integrated under the bench set for under counter dishwasher WD-4
- Makes handling of wash ware more easy and efficient.
- Soaking wash ware up to GN 1/1.
- Smart storage for detergent and drying agent.
An optimal and effective integrated under the bench set for under
counter dishwasher WD-4 that makes the work in the dishwashing room more
efficient. The bench is made of stainless steel. The basin is built for
soaking of wash ware up to GN 1/1.
A storage area for detergent, drying agent and baskets is placed safe
behind the lockable door on the dishwasher’s side. The bench is complete
with splash plate, a cutlery box for soaking of cutlery, overflow
protection and draining valve.
- Lockable door
- Splash plate with holder for washing pistol
- Washing pistol with thermostat mixer tap
Condensing UnitThe condensing unit significantly improves the room climate at the same time saving energy.
Givs a better working environment
- significantly improves the room climate.
-recovers the energy in steam.
- The machine only has to be connected to cold water.
As option for our hood type dishwashing maschines there is a condensing unit which is attached on the top edge of the machine. Using the accessory gives a significantly improved working environment and room climate at the same time saving energy. The ventilation flow needed for the room is redcued with up to 50%.
The condesing unit can save 9% energy or 0,03 kWh/basket.
After the machine ends the washing process, the steam created during the final rinse condensates using a condensor battery. The incoming cold water is pre-heated in the condensing unit. At he same time cool air is streaming into the dishwashing room giving a better room climate.If combined with a heat exchanger 41% energy or 0,13 kWh/basket is saved.
- Splash plate
- Cutlery box for soaking of cutlery
- Waste collector with rubber ring guide collar
- Shelf for baskets
- Draining valve
- Overflow protection
Sorting unitA complete, compact sorting unit for rational handling of wash ware.
A complete, compact sorting unit for rational handling of wash ware.
Soaking, scraping and stacking are ergonomically and easily performed.
The sorting unit is made of stainless steel. The basin is built for soaking of wash ware up to GN 1/1. Its stand is made of stainless steel square pipes 40x40 mm and has adjustable feet. A splash plate, a cutlery box for soaking of cutlery, overflow protection and draining valve are included as standard. The sorting unit can be completed with a shelf for baskets, a washing pistol with hose reel, an easily attached unloading table, scraper and a mobile waste trolley.
Pistol SprayerPistol sprayer with thermostatically controlled temperature regulation
Pistol sprayer in manufactured of chrome-plated brass, and consists of a thermostatically controlled temperature regulator, stand pipe with wall attachment unit and hook, black high-pressure hose with equalizer spring, and hand sprayer which turns off automatically.
Motor-Powered Turn Track
Motor-powered turn track made entirely from stainless steel. Frame made from non-corrosive, 30x30 mm square tubing with adjustable feet. Suitable for all 50x50 cm washing baskets. The design means that the baskets are loaded using a plastic drive chain. Equipped with an emergency stop.
The turn track is connected to the machine’s outfeed side, either directly to the machine or to a straight section placed between the machine and the track. The turn track can also be placed on the infeed side. Electrical connection: 400V 3N~ 50Hz 0.12kW.
Bar-Fed Turn Track
Bar-fed 90°/180° turn tracks
The entire turn track is made from stainless steel and fitted with stopper hooks made from non-fric. The turn track is driven by the machine feed, via a feeder bar, which is why no extra motor is required.
The open construction of the turn track makes cleaning easy.
The frame is made from non-corrosive square tubing and fitted with adjustable plastic feet.
Drying Zoned for Rack Convenyor Machines
A range of efficient drying zones to suit changing requirements, with low impact on the environment.
Our dishwashers can be equipped with WD-T60, WD-T80, WD-T60F or WD-T90 drying zones.
A powerful fan blows warm air over the washed items. The drying zones are primarily for use with items such as plastic trays which do not accumulate large amounts of heat. The distribution regulator on the fan targets the warm air effectively to keep energy costs low. Part of the energy is used by a condensing battery which heats up the incoming cold water.
The WD-T60, WD-T80 and WD-T60F have a heat output of 3,3 kW, while the figure for the WD-T90 is 2x3,3 kW. The WD-T80 is intended for use with dishwashers which have a motor-powered turn track.
Trolleys, Granule Portwashers.
Conveyor 90 for WD-PRM60
An extremely compact solution with motor-powered conveyor for WD-PRM60 in combination with a rack conveyor machine.
An extremely compact solution with motor-powered conveyor for WD-PRM60 in combination with a rack conveyor machine. A perfect solution when using a PRM in a narrow small size dishwashing room. Requires less than 90 cm between wall and in-feeding side of the dishwasher. Gives great flexibility due to the independent operation regardless of in feeding solution. Complete with emergency stop.
Electrical connection 400V 3N~ 50Hz, 0,12 kW
Scrapping & Loading Table WD-100 GR
Scrapping & loading table WD-100GR
The cartridge slides easily on the large rollers on the scraping and loading table.
Sorting Bench WD-90 GR
There are many variations of passages
available, but the majority have suffered
alteration in some form, by injected humour,
or randomised words which.
Accessories for ACS Cutlery Sorter
Accessories for ACS Cutlery Sorter